features - high reliability for low cost - available as tcxo and vctcxo - temperature stability of +-1 ppm available - excellent phase noise performance - low power consumption series package hcmos / ttl clipped sine wave vs. temperature vs. supply voltage vs. load vs. aging operating temperature range storage temperature range voltage standard option rise and fall time for hcmos rise and fall time for ttl "0" level "1" level "0" level "1" level clipped sine wave hcmos ttl clipped sine wave standard option external control voltage 10 hz offset from carrier 100 hz offset from carrier 1 khz offset from carrier 10 khz offset from carrier 100 khz offset from carrier pin 1 pin 7 pin 8 pin 14 - extended temperature range to -40/+85c available 10 ns max. (10% vdd to 90% vdd) hcmos / ttl clipped sine wave symmetry frequency range current not connect or control voltage -155 dbc/hz -0/+50c ~ -40/+85c 1.65 vdc +-1.35 vdc -150 dbc/hz -80 dbc/hz -105 dbc/hz -140 dbc/hz +-5 ppm min. by external control voltage 10% vdd max. 90% vdd min. +3.3 vdc +-5% -40/+85c 2 ttl 20 ma max. for hcmos / ttl 2 ma max. for clipped sine wave 40/60% for hcmos / ttl 0.7 v peak to peak min. 2.4 vdc min. 0.4 vdc max. 15 pf M4319 smd-package 21.3 x 11.7 x 4.7 mm 2.0 ~ 51.84 mhz 10.0 ~ 35.0 mhz +-1 ~ +-5 ppm +-0.5 ppm max. / 3.3vdc +-5% +-0.2 ppm max. / 10 pf ~ 20 pf +-1 ppm max. per year petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de other parameters are available on request / create here your specification frequency stability hcmos pin connection signals frequency adjustment phase noise (typical) input ttl load supply voltage output 45/55% for hcmos / ttl 10 ns max. (0.4 to 2.4 volt) +-3 ppm min. per internal trimmer case ground output 10 k ? / 10 pf petermann technik time & frequency components
petermann technik time & frequency components petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de part numbering guide example M4319-s-j-10-s-v-27.000mhz series M4319 s = clipped sine wave t = ttl output signal h = hcmos j = 0/+50c n = -10/+60c x = 0/+70c m = -20/+70c k = -30/+75c temperature range w = -40/+85c 10 = +-1.0 ppm 15 = +-1.5 ppm 20 = +-2.0 ppm 25 = +-2.5 ppm 50 = +-5.0 ppm stability vs. temperature x = other value - please indicate your required value blank = 40/60% symmetry for hcmos / ttl s = 45/55% blank = tcxo vcxo option v = vctcxo (external voltage control 1.65 +-1.35 vdc for +-5 ppm min.) frequency frequency in mhz tape and reel package -t outline drawing M4319 21.3+0.5 - 18.3+0.3 - 1 1 . 7 + 0 . 5 4 . 0 + 0 . 3 - - 03.5+0.5 - 4 . 7 + 0 . 3 - 4.0 7 . 6 2 + 0 . 3 - 1 . 0 + 0 . 1 - #1 #7 #8 #14 - marking area 1 . 5 5.7 #14 #1 #7 #8 7 . 6 2 18.8 pin function #1 #8 #14 case ground output v dd n.c. or control volt #7 unit: mm
petermann technik time & frequency components petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de test circuit for hcmos test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 c =15pf l note: cl includes probe and fixture capacitance v cc control voltage test circuit for ttl test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 1n4148 or equiv control voltage note: cl includes probe and fixture capacitance v dd r=390 l c =15pf l test circuit for clipped sine wave test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 c =10pf l n.c. or control voltage note: cl includes probe and fixture capacitance v dd 10k (hcmos load) tr tf th t v ol duty=th/t v oh 90%v dd 50%v dd 10%v dd (ttl load) tr tf th t v ol duty=th/t v oh 2.4v 1.4v 0.4v 0.0v dc v p-p 0.7v min clipped sine wave
|
